👉Why Bars Are Bent In Slabs Near At Support
📜Bent up bars: Are the main reinforcements bent at a suitable angle to act as shear reinforcements.
⏺Reinforcements are bent up to the supports/ends where greater compressive force occurs.
📍Bars Are Bend Near At Support To
🔰1- To resist shear force.
🔰2-To resist (NBM) adjacent at supports.
🔰3- To increment the strength of RCC in the slab.
🔰4- Bent Up bar can abate the amount of steel.
🔰5- Bent up bars in the slab is more strong form normal slab.
🔰6- Bent up bars sufficiently increase the deformation capacity of slabs as compared to those not having bars bent.
🔰7- By extending bars up to supports, we can also lower the risk of brittle failure due to higher compressive stresses causing the structure to collapse.
💫There are two patterns to bend the bars
🚧1- Single lattice system
🚧2- Double lattice system
⏺Bent up bars (any type) are always provided with vertical or inclined stirrups.
⏺Bent up bars are used for the economization of material.
@etconp
📜Bent up bars: Are the main reinforcements bent at a suitable angle to act as shear reinforcements.
⏺Reinforcements are bent up to the supports/ends where greater compressive force occurs.
📍Bars Are Bend Near At Support To
🔰1- To resist shear force.
🔰2-To resist (NBM) adjacent at supports.
🔰3- To increment the strength of RCC in the slab.
🔰4- Bent Up bar can abate the amount of steel.
🔰5- Bent up bars in the slab is more strong form normal slab.
🔰6- Bent up bars sufficiently increase the deformation capacity of slabs as compared to those not having bars bent.
🔰7- By extending bars up to supports, we can also lower the risk of brittle failure due to higher compressive stresses causing the structure to collapse.
💫There are two patterns to bend the bars
🚧1- Single lattice system
🚧2- Double lattice system
⏺Bent up bars (any type) are always provided with vertical or inclined stirrups.
⏺Bent up bars are used for the economization of material.
@etconp
1 comment
Tttt Bekele
good question
Log in to comment